Modified wood modulates electrical current: researchers at Linköping University, together with colleagues from the KTH Royal Institute of Technology, have developed the world’s first electrical transistor made of wood. (Courtesy: Thor Balkhed)
Topics: Applied Physics, Biomimetics, Electrical Engineering, Materials Science, Research
Researchers in Sweden have built a transistor out of a plank of wood by incorporating electrically conducting polymers throughout the material in a way that retains space for an ionically conductive electrolyte. The new technique makes it possible, in principle, to use wood as a template for numerous electronic components, though the Linköping University team acknowledges that wood-based devices cannot compete with traditional circuitry on speed or size.
Led by Isak Engquist of Linköping’s Laboratory for Organic Electronics, the researchers began by removing the lignin from a plank of balsa wood (chosen because it is grainless and evenly structured) using a NaClO2 chemical and heat treatment. Since lignin typically constitutes 25% of wood, removing it creates considerable scope for incorporating new materials into the structure that remains.
The researchers then placed the delignified wood in a water-based dispersion of an electrically conducting polymer called poly(3,4-ethylene-dioxythiophene)–polystyrene sulfonate, or PEDOT: PSS. Once this polymer diffuses into the wood, the previously insulating material becomes a conductor with an electrical conductivity of up to 69 Siemens per meter – a phenomenon the researchers attribute to the formation of PEDOT: PSS microstructures inside the 3D wooden “scaffold.”
Next, Engquist and colleagues constructed a transistor using one piece of this treated balsa wood as a channel and additional pieces on either side to form a double transistor gate. They also soaked the interface between the gates and channels in an ion-conducting gel. In this arrangement, known as an organic electrochemical transistor (OECT), applying a voltage to the gate(s) triggers an electrochemical reaction in the channel that makes the PEDOT molecules non-conducting and therefore switches the transistor off.
A transistor made from wood, Isabelle Dumé, Physics World
Physics and Nano 